Specifications for Opex OP500H
Lift for persons with physical disabilities

General description

• Capacity : up to 1000 pds. ( 455.0 kg.)
• Speed : 30 - 50 fpm. (0.15 - 0.25 m./s.)
• Maximum travel up to 23' ( 7 m. ) , as per CSA, B355-94
• Emergency light , alarm , emergency down & battery back-up with auto-charger
• Constant pressure operation
• 6.25 pds./ ft. ( 9.4 kg. / m.), " T " shape steel guide rail
• Aluminium guide shoes with polyethylene insert
• 1:2 roped hydraulic system or cylinder with direct acting piston
  

Entrances

• Door and frame in steel, satin coat finish " Galvaneal " 0.30 oz./ sq.ft.( ready to be painted )
• 2 speed door closer , adjustable , pre-installed on the door
• Door supported by 3 commercial ball bearing type hinges
• 1 1/2 hr. fire-retardent ,ULC approved
• GAL type "N" electro-mechanical doorlock,pre-mounted on the door frame
• Clear opening : 35" x 79" (883 x 2007 mm.) with wired glass vision panel : 5" x 21" (127x533 mm.)
• Stainless steel handle and push-plate
• Call stations are not installed in the door frame . Separate call station incorporates. Call button and in use light

Options

• Power door operator
• Keyed call system
• Aluminium Sill
• Various dimensions for doors and frames

" DesignerCab " standard

• Dimensions : refer to chart
• " Black finish " steel frame structure
• " Melamine " wall panels removable from inside the cab
• Ceiling structure with solid panels or aluminum eggcrate
• 2 halogen low temperature lights or fluorescent system , with timed cabin lighting where permitted by the code
• Stainless steel tubing handrail
• Car operating panel includes a constant pressure operating system,an
  "on / off" key control and a " alarm / stop " button
• Cab floor is "plywood finish".

Options

• Steel frame structure in stainless steel or special finishes on demand
• Wall panels available in stratified , stainless steel or others special finishes on demand
• Ceiling panels available in stratified / stainless steel or special finishes on demand
• Telephone box with stainless steel door

Power pak PU20-E

• Motor-pump with external motor
• Motor 2 hp., and 3 hp. , available in various voltages
• Gear pump type
• The KV1P control valve provides a smooth " in use " operation
• Unit comes complete with tank , oil level gauge , pressure gauge , gate valve , low pressure switch and emergency descent valve
• 15' ( 4.55 m.) of hydraulic hose (100R2) and required fittings included
  

Power pak PU25-S

• Motor-pump with submersible motor. Low noise operation
• Motor 2.5 hp. , 220 / 1 / 60 or 3.5 hp. , 600 / 3 / 60
• Srew pump type
• The KV1P control valve provides a smooth " in use " operation
• Unit comes complete with tank,oil level gauge , pressure gauge,gate valve, low pressure switch and emergency descent valve
• 15' ( 4.55 m.) of hydraulic hose (100R2) and required fittings included

Controller

• Constant pressure operation required by code standard
• Automatic operation available where allowed by code
• Built in backup power for descent and lighting in case of power failure
• Timed automatic lighting system optional where allowed by code